DESCRIPTION: The OEM BASIC Stamp 2 (kit form) s a
through-hole version of the popular BASIC Stamp 2 module. The kit includes
the PBASIC interpreter, EEPROM, resonator, DB-9, and all the resistors and
transistors needed to build a BASIC Stamp 2. Presented in a 20-pin SIP
module format with standard 0.1"spacing. The PC board includes
labeled component locations with visible traces between parts. PBASIC
interpreter and EEPROM are socketed to allow for replacement. This is a
fully functional BASIC Stamp. It is programmed using our PBASIC DOS or
Windows Editor just like the BS2-IC module. Please note that the lower
power mode is only available when the regulator is removed and the BASIC
Stamp is powered on the vdd. The documentation includes a complete bill of
materials with three sources and part numbers for each component. The
BASIC Stamp Windows editor and BASIC Stamp manual may be downloaded
separately if you don’t already have them. Measures 5.1 x 5.1 cm
(2"x 2").
