+63(32) 495-2106   |   +63(32) 268-6937 apexsinc@apexvalue.com

Leaving mozcom?

As of now, we are currently thinking of leaving mozcom email.

Yes you heard it right, since from the start of building our company we are using that email address apesinc@mozcom.com.

We’ll inform you if we have final decision on leaving apexsinc@mozcom.com in the next year (2022)

As of writing this content, it’s February 1, 2021.

See below the mozcom homepage looks like:

2021

mozcom 2021 homepage

2020

Leaving mozcom? 1

2019

Leaving mozcom? 2

2018

Leaving mozcom? 3

2017

Leaving mozcom? 4

2016

Leaving mozcom? 5

2015

Leaving mozcom? 6

2014

Leaving mozcom? 7

2012

Leaving mozcom? 8

2011

Leaving mozcom? 9

2010

Leaving mozcom? 10

2009

Leaving mozcom? 11

2008

Leaving mozcom? 12

2007

Leaving mozcom? 13

2006

Leaving mozcom? 14

2005

Leaving mozcom? 15

2004

Leaving mozcom? 16

2003

Leaving mozcom? 17

2000

Leaving mozcom? 18

1999

Leaving mozcom? 19

1998

Leaving mozcom? 20

1997

Leaving mozcom? 21

1996

Leaving mozcom? 22
Guide for Davis Vantage Pro2 Plus install

Guide for Davis Vantage Pro2 Plus install

This article is a Guide for Davis Vantage Pro2 Plus install.

Part 1 : Straight From The Box

The following video is a Straight From The Box of Davis Vantage Pro2 Plus.

This is the first video in a three-part series covering the replacement of our 11 years old Vantage Pro2 station. In this first part, we look at the contents of a newly purchased Davis Vantage Pro2 Plus Weather Station.

Part 2 : Mounting the Integrated Sensor Suite (ISS) and Anemometer

The following video is a Mounting the Integrated Sensor Suite (ISS) and Anemometer of Davis Vantage Pro2 Plus.

This is the second video in our three-part series covering the replacement of our 11 years old Vantage Pro2 station. In this second part, we mount/install the Integrated Sensor Suite and a remote anemometer. The remote anemometer requires the use of a Davis Wireless Transmitter (6332). We will show you how to configure this unit as well.

Part 3 : Configuring the Console and Installing WeatherLink

The following video is a Configuring the Console and Installing WeatherLink.

This is the third video in our three-part series covering the replacement of our 11 years old Vantage Pro2 station. In this final installment we will begin configuring the Vantage Pro2 Weather Station Console (6312). This console is used on both the Pro2 and Pro2 Plus models. We also cover the installation and configuration of WeatherLink for the local storage of your observational data. We finish the video with a look into wx2sql, the program that I use to store my weather observations in a MYSQL database.

Disclaimer:

The following video used in this article is owned from Hoosier Weather.

Vantage Pro2 Plus is a registered trademark from Davis Instruments.

This article can be accessed thru this short link:

https://www.apexvalue.com/go/vexcmbjwk

You can copy and share this link to anyone.

Installing Davis Vantage Connect

Installing Davis Vantage Connect

This article will guide you on installing Davis Vantage Connect.

Davis Vantage Connect is a self-contained and solar-powered weather-resistant device that collect data from any Davis weather station and any Davis sensor. This Vantage Connect pushes the data to the Davis weatherlink.com service via the mobile phone/cellular network. Then you can access your data on WeatherLink.com or on Davis mobile apps.

Davis Vantage Connect common setup installation figures

These are some of the several images who purchase Davis Weather Station with their setup installation using Vantage Connect. (images from imgur.com)

How to Power On Davis Vantage Connect device

The following video is a demonstration on how to Power On Davis Vantage Connect device.

Davis Vantage Connect Installation Diagram

This diagram shows a Vantage Pro2 sensor suite sending data to a Vantage Connect. The Vantage Connect then transmits the data via cellular connection to WeatherLink.com, where it can be viewed on a computer or smartphone. See link below for installation diagram.

https://static.apexvalue.com/files/vantage-connect/Vantage-Connect-Installation-Diagram-07396_018_ID_6621.pdf

Disclaimer:

You can also use following information using the Vantage Connect device for your references:

https://www.davisinstruments.com/vantage-connect/

https://www.davisinstruments.com/vantage-connect/tech-specs/

https://www.manula.com/manuals/pws/davis-kb/1/en/topic/vantage-connect-unit

Google slides URL parameters to English

Hello everyone, are you looking on how to change Google slides URL parameters to English?

Well you are in the right page.

If you have a google slides presentation and you shared that URL to someone.

The language is automatically generated based on the locations.

So in order to change the language of your presentation.

You just need to add the hl parameter.

How to add?

For example you have a following google slides url:

https://docs.google.com/presentation/d/PRESENTATION_ID/edit?hl=en

That’s it.

Hope you learned from this article.

Yours,

Jaymar