+63(32) 495-2106   |   +63(32) 268-6937 apexsinc@apexvalue.com

This article is a Guide for Davis Vantage Pro2 Plus install.

Part 1 : Straight From The Box

The following video is a Straight From The Box of Davis Vantage Pro2 Plus.

This is the first video in a three-part series covering the replacement of our 11 years old Vantage Pro2 station. In this first part, we look at the contents of a newly purchased Davis Vantage Pro2 Plus Weather Station.

Part 2 : Mounting the Integrated Sensor Suite (ISS) and Anemometer

The following video is a Mounting the Integrated Sensor Suite (ISS) and Anemometer of Davis Vantage Pro2 Plus.

This is the second video in our three-part series covering the replacement of our 11 years old Vantage Pro2 station. In this second part, we mount/install the Integrated Sensor Suite and a remote anemometer. The remote anemometer requires the use of a Davis Wireless Transmitter (6332). We will show you how to configure this unit as well.

Part 3 : Configuring the Console and Installing WeatherLink

The following video is a Configuring the Console and Installing WeatherLink.

This is the third video in our three-part series covering the replacement of our 11 years old Vantage Pro2 station. In this final installment we will begin configuring the Vantage Pro2 Weather Station Console (6312). This console is used on both the Pro2 and Pro2 Plus models. We also cover the installation and configuration of WeatherLink for the local storage of your observational data. We finish the video with a look into wx2sql, the program that I use to store my weather observations in a MYSQL database.

Disclaimer:

The following video used in this article is owned from Hoosier Weather.

Vantage Pro2 Plus is a registered trademark from Davis Instruments.

This article can be accessed thru this short link:

https://www.apexvalue.com/go/vexcmbjwk

You can copy and share this link to anyone.