+63(32) 495-2106   |   +63(32) 268-6937 apexsinc@apexvalue.com
Timed Engine Shut Off

Timed Engine Shut Off

Introducing: Timed Engine Shut Off (TESO)

So you come into this page and want to know about this Timed Engine Shut Off or shall we say in short as TESO.

What is TESO? What does it do?

TESO means Timed Engine Shut Off. TESO can protect and extend the life of your diesel powered and turbo aspirated engines (diesel and gasoline engines).

TESO Features

Our TESO product offers the following features:

  • Monitors for high coolant temperature and shuts of the engine when unsafe temperature is detected.
  • Monitors low engine oil pressure and shuts off the engine when oil pressure falls below a safe level.
  • TESO can provide engine cool down idle time period after Off/On/Start switch is placed in the Off position. This is especially important for turbo charged engines to prevent expensive damage to the turbo caused by oil “coking”.
  • TESO monitors the status of the parking brake and will immediately shut off the engine if the brake is released while TESO is in the shut off idle run mode.

For detailed product use, please visit/download the links below:

Download Link: TESO Installation Guide (PDF)
Download Link: TESO Set-Up Procedures Guide PDF
Download Link: DHL Philippines – Customer Feedback

You can also visit some of our Customer Feeback from TESO product below.

Wireless Vantage Pro2 Plus Integrated Sensor Suite

Wireless Vantage Pro2 Plus Integrated Sensor Suite

Introducing: a Wireless Vantage Pro2 Plus Integrated Sensor Suite

Straightforward explanation: With this Wireless Vantage Pro2 Plus Integrated Sensor Suite, you can use this to gather weather data with outside & inside temperature & humidity, barometer, wind, rain, uv and solar radiation sensors. The only difference between Pro2 and Pro2 Plus is that a Pro2 Plus has UV & Solar Radiation Sensors and Pro2 has not included that sensor.

Wireless Vantage Pro2 Plus Integrated Sensor Suite

Wireless Integrated Sensor Suite (ISS) for use with Vantage Connect, Vantage Pro2 and Vantage Vue consoles or Weather Envoy and WeatherLink. The corrosion-proof sensor suite combines a rain collector, temperature and humidity sensors, solar and UV sensors, and anemometer into one package for rugged reliability and performance.

What are the feature?

With this versatile integrated sensor suite, it combines the anemometer, rain collector, and temperature and humidity sensors into one package. The following feature is:

  • Wireless sensor suite with integrated sensors
  • For improved accuracy, temperature and humidity sensors are housed inside a radiation shield. The shield protects against solar radiation and other sources of radiated and reflected heat.
  • Includes Solar and UV sensors
  • Detachable anemometer provides wind speed and direction and can be sited up to 40 ft. (12 m) above the other sensors.
  • Ability to add UV and Solar sensors
  • Data updates every 2.5 seconds
  • Wireless range is up to 1000 ft. (300 m) outdoors, line of sight. Typical range through walls under most conditions is 200 ft. to 400 ft. (60 m to 120 m).

You can also use this with Vantage Connect, Vantage Pro2 and Vantage Vue consoles, Weather Envoy and WeatherLink.

Whats in the box?

  • Wireless integrated sensor suite (ISS)
  • Detachable anemometer with 40 ft. (12 m) cable.
  • Solar panel attached in ISS

Request a Quote


    Wireless Vantage Pro2 Integrated Sensor Suite

    Wireless Vantage Pro2 Integrated Sensor Suite

    Introducing: a Wireless Vantage Pro2 Integrated Sensor Suite

    Straightforward explanation: With this Wireless Vantage Pro2 Integrated Sensor Suite, you can use this to gather weather data with outside & inside temperature & humidity, barometer, wind, and rain sensors. The only difference between Pro2 and Pro2 Plus is that a Pro2 Plus has UV & Solar Radiation Sensors and Pro2 has not included that sensor.

    Wireless Vantage Pro2 Integrated Sensor Suite

    Wireless Integrated Sensor Suite (ISS) for use with Vantage Connect, Vantage Pro2 and Vantage Vue consoles or Weather Envoy and WeatherLink. The corrosion-proof sensor suite combines a rain collector, temperature and humidity sensors, and anemometer into one package for rugged reliability and performance.

    What are the feature?

    With this versatile integrated sensor suite, it combines the anemometer, rain collector, and temperature and humidity sensors into one package. The following feature is:

    • Wireless sensor suite with integrated sensors
    • For improved accuracy, temperature and humidity sensors are housed inside a radiation shield. The shield protects against solar radiation and other sources of radiated and reflected heat.
    • Detachable anemometer provides wind speed and direction and can be sited up to 40 ft. (12 m) above the other sensors.
    • Ability to add UV and Solar sensors
    • Data updates every 2.5 seconds
    • Wireless range is up to 1000 ft. (300 m) outdoors, line of sight. Typical range through walls under most conditions is 200 ft. to 400 ft. (60 m to 120 m).

    You can also use this with Vantage Connect, Vantage Pro2 and Vantage Vue consoles, Weather Envoy and WeatherLink.

    Whats in the box?

    • Wireless integrated sensor suite (ISS)
    • Detachable anemometer with 40 ft. (12 m) cable.
    • Solar panel attached in ISS

    Request a Quote


      Wireless Vantage Pro2 Console Receiver

      Wireless Vantage Pro2 Console Receiver

      Introducing : Wireless Vantage Pro2 Console Receiver

      Straightforward explanation: With this Wireless Vantage Pro2 Console Receiver you can use this to receive your weather station data from a Wireless Vantage Pro2 Integrated Sensor Suite.

      Wireless Vantage Pro2 Console Receiver
      View data from a wireless Vantage Pro2 integrated sensor suite, or for use with other wireless Davis stations. This compact console is loaded with features, including a backlit LCD screen and that makes viewing weather data easy, day or night.
      Powerful on-screen graphing, alarms and forecasts
      Get alarms when weather conditions change.

      What are the feature?

      With this Wireless Vantage Pro2 Console Receiver you can enjoy the benefits of the following feature:

      • See the last 24 days, weeks or years of data graphed on the console screen.
      • Get alarms when weather conditions change.
      • See hourly forecasts and more information in the ticker tape
      • View data from a wireless Vantage Pro2 integrated sensor suite, or for use with other wireless Davis stations. This compact console is loaded with features, including a backlit LCD screen and that makes viewing weather data easy, day or night.
      • Re-transmit the data it receives to other wireless Vantage Pro2 or Vantage Vue consoles or Weather Envoy.
      • When a storm knocks out your electrical power, your console will keep running for up to 9 months on three C-cell batteries.

      Can also be used with Wireless Temperature, Temperature/Humidity, or Leaf Wetness & Soil Moisture/Temperature Stations.

      Compatible with all wireless Vantage Pro2 and Vantage Vue transmitting stations.

      Whats in the Box?

      Requires

      Request Quote for Wireless Vantage Pro2 Console Receiver:

      Request a Quote


        Vantage Pro2 Wireless Weather Station

        Vantage Pro2 Wireless Weather Station

        This wireless weather station provides accurate, reliable weather monitoring in a self-contained, easy-to-install system. Includes outdoor sensor array and LCD console.

        Mounting hardware included; mounting pole sold separately.

        US version: The rain collector is calibrated to 0.01 inch.
        M version: The rain collector is calibrated to 0.2 mm.

        Request a Quote

        for Vantage Pro2 Wireless Weather Station


          Available in four versions:

          • US (United States):
            • Units of Measure: Data is reported in US standard units.
            • Data Transmission: Uses US radio frequency from 902 to 928 MHz.
            • Rain Data: The rain collector is calibrated to 0.01 inch.
            • Electrical Power Supply: US power adapter.
          • M (Metric, United States):
            • Units of Measure: Data is reported in metric units.
            • Data Transmission: Uses US radio frequency from 902 to 928 MHz. .
            • Rain Data: The rain collector is calibrated to 0.2mm.
            • Electrical Power Supply: US power adapter.
          • UK (United Kingdom): Not available for use/purchase within the USA.
            • Units of Measure: Data is reported in metric units.
            • Data Transmission: Uses UK radio frequency 868 MHz.
            • Rain Data: The rain collector is calibrated to 0.2mm.
            • Electrical Power Supply: UK power adapter.
          • EU (Europe): Not available for use/purchase within the USA.
            • Units of Measure: Data is reported in metric units.
            • Data Transmission: Uses EU radio frequency 868 MHz.
            • Rain Data: The rain collector is calibrated to 0.2mm.
            • Electrical Power Supply: Euro power adapter.