YOU HAVE 60 MINUTE SMOKE MASK SO YOU HAVE TIME TO GET OUT ALIVE
You can able to deploy your Fire Escape Mask in well under 30 seconds…
Here’s how it’s done:
STEP #1: PULL BACK THE HANDLE & REMOVE THE MASK FROM THE BOX
Right on top of the box is a red sticker stating “In case of emergency, pull upward to open” and an arrow highlighting which direction to pull.
Slide your fingers under this and pull upward and in the direction of the arrow to open the front of the box.
Grab the vacuum sealed smoke mask from the box and we’re ready on the step #2.
STEP #2: TEAR OPEN THE VACUUM PACKAGING
Grab the top of the plastic packaging on each side of the notch, tear open the plastic vacuum packaging, and pull out the mask.
STEP #3: REMOVE THE CANISTER PLUGS
Once you’ve removed the mask from the packaging and before you pull it over your head, you need to remove the canister plugs.
Grab the string and pull out the plus on the front of the mask.
And then again using the string, pull the plug from the inside of the mask.
Now your mask is ready for use.
STEP #4: PULL THE MASK OVER YOUR HEAD & TIGHTEN THE REFLECTIVE STRAP
After you’ve pulled the plugs from your smoke hood, pull your mask over your head positioning the breathing apparatus over your nose and mouth so you can easily breathe and see out of the clear front visor.
If the mask is loose on your head, pull on the end of the reflective strap to better secure the mask.
STEP #5: MAKE YOUR ESCAPE!
That’s it. It’s just 4 simple steps and less than 30 seconds and you can pull out your Fire Escape Mask and get it on to dramatically increase your chances of survival in a fire.