• Nodes connect over a self-optimizing mesh network and feed critical sensor data to an EnviroMonitor Gateway.
• Connect up to 32 Nodes to one Gateway with up to four sensors in each Node.
• Choose from a growing list of Davis and third-party sensors including soil moisture, temperature, salinity; flow meters, pressure switches, level sensors, and anemometers.
• Add Long Range Antennas to get communication range from Node-to-Node or Node-to Gateway of up to 10,000’/3,000 m.
• Easy sensor installation: the EnviroMonitor app walks your through installation.
• Self-contained, weather-resistant shelter is easy to mount on a post or pole.
• Solar-powered with 4 D-cell backup batteries.
• One-year manufacturer’s warranty.

How does an EnviroMonitor Node work?

The EnviroMonitor Node is simply a relay that transmits data from the sensor array to the Gateway so that it can be uploaded to the WeatherLink Cloud. The sensors are installed directly in the Node. The Node processes the data and sends it to the Gateway and to other Nodes via the mesh network. The Gateway then uploads the data to the Cloud via cellular or Wi-Fi communication.

How do I Install an EnviroMonitor Node?

The first step to installing your Node is planning which sensors you need and where to mount the Node or Nodes and Gateway.

The Nodes should be placed where the data is needed, and so that they have unobstructed lines of sight to the Gateway or another Node. Obstructions like hills, large metal barriers, or trees could block the signal – you might need to plan additional Nodes to act as repeaters to avoid such obstructions. Mounting the Nodes and Gateway as high off the ground as possible can increase the transmission range. Since the Nodes communicate with each other, you can create a chain or mesh network that covers a distance much longer than the transmission range of a single Node.

Each Gateway can receive data from up to 32 Nodes. (You can add additional Gateways to your account to receive data from additional Nodes.)

Once you have a plan for where your Gateway and Nodes should be mounted, The EnviroMonitor app will walk you through the steps to set up and mount each component of your system. You will need to go to the iOS App Store or Google Play Store and download the EnviroMonitor App onto your smartphone.

Where can I use an EnviroMonitor Node?

The EnviroMonitor Node is designed for use in fields, greenhouses, gardens — even those that are quite remote. It is solar-powered and uses four D-cell batteries for backup. It is also self-contained and weather resistant. You can mount it on a post or pole, and it comes with a selection of mounting hardware for various mounting situations. You can add a long-range antenna that can extend the transmission range up to 10,000′. This makes it perfect for use in remote locations or building an array of sensors across a large field.

• Requires an Annual Service Plan and one-time hardware activation fee.
• Collects all essential data from EnviroMonitor Nodes and pushes it securely to the Cloud server via LTE cellular connectivity.
• Access your data on your phone, tablet and computer on WeatherLink.com, WeatherLink mobile app and the ag-focused Mobilize app, 24/7.
• Add up to 32 Nodes with up to four sensors each and any cabled Vantage Pro2 sensor suite; choose from 100+ Davis and third-party sensors.
• 5-watt solar panel provides ample power; rechargeable 6-volt provides backup.
• On WeatherLink.com, set alarms and email notification for high and low weather conditions.
• Self-contained in a weather-resistant shelter that protects electronics.
• Add 8 dBi Long-Range Antenna (7678) to get communication range of up to 10,000’/3,000m.
• EnviroMonitor App walks you through easy installation.
• For use in the United States only. One-year manufacturer’s warranty.

How does the Davis EnviroMonitor Gateway work?

The first thing you need to do is to decide where and what type of data you want to collect. You need to decide how many sensors you need and where they should be placed. Once your system arrives, you should install the EnviroMonitor app on your smartphone. You can find it in the Google Play Store or iOS App Store. The app will guide you through setting up the system and connecting it to WeatherLink.com. It will also instruct you on connecting the Nodes to the Gateway and installing your sensors on the Node.

The instructions walk you through everything you need from confirming your cellular signal strength at intended node sites to finding the optimal sites for placing your nodes. You will also receive a user’s manual with diagrams and easy-to-follow step-by-step instructions. The manual is also available here on the Davis Instrument website.

What can I use to access the data from my EnviroMonitor Gateway?

You can access your data in four different ways. You can use your phone, tablet, or computer to view it via WeatherLink.com. The WeatherLink mobile app lets you access the data from anywhere you have a cell phone signal. You can also use the Mobilize app that is geared toward agricultural operations and crop management.

Where can I use my Davis EnviroMonitor Gateway?

One of the best features of this system is that you can use it almost anywhere there is a cellular connection. You do not need to house it in a building or be near a power outlet. The EnviroMonitor Gateway comes with a 5-watt solar panel that provides sufficient power to operate it for a long time in addition to a 6-volt rechargeable battery for backup. It is also housed in a self-contained weather-resistant shelter to protect the electronics. If weather conditions should become unfavorable, you can have the system send you an email to let you know.

For longer-range capabilities, you can add the 8dBi EnviroMonitor long range antenna that extends the range of the system to up to 10,000 feet. With the capability to connect up to 32 Nodes which can transmit to each other, you can cover a large area fwith a seamless mesh of data sensors. The unit is only designed for use in the United States, and you can use it anywhere LTE cellular service is available. The system is made to operate with the Davis cabled GroWeather Sensor Suite, and the Nodes support a long list of sensors from Davis and other third-party suppliers.