• Collects all essential data from EnviroMonitor Nodes and pushes it securely to the Cloud server via Wi-Fi or Ethernet.
• Access your data on your phone, tablet, and computer on WeatherLink.com, WeatherLink mobile app and the ag-focused Mobilize app, 24/7.
• Add up to 32 Nodes with up to four sensors each and any cabled or wireless Vantage Pro2 or Vantage Vue sensor suite; choose from 100+ Davis and third-party sensors.
• AC-powered with battery backup.
• Can be mounted outside in weather-resistant Universal Shelter (6618).
• Add 8 dBi Long-Range Antenna (7678) to get communication range of up to 10,000’/3,000 m.
• EnviroMonitor App walks you through easy installation.
• One-year manufacturer’s warranty.

Choose one of three update intervals in the EnviroMonitor app during installation. Requires a $30 one-time Hardware Activation Fee (#6645).

Update Intervals	Product Number	Annual Service Charge
5 min	#6892D	$180
15 min	#6894D	$144
60 min	#6896D	$120

Contact us directly for annual service plan information and availability for customers outside the US. All prices are in USD and per Gateway/IP Gateway.

How does the EnviroMonitor IP Gateway work?

The IP Gateway uploads data to the WeatherLink Cloud using a Wi-Fi or Ethernet connection. It receives data from sensors in the Nodes via mesh transmission. Nodes should be sited for optimal transmission, but, since the Nodes transmit to each other, they can act as repeaters and the mesh becomes self-optimizing for reliable data transmission. Next, you install the IP Gateway at a central location. Finally, install the EnviroMonitor App, open it, and follow the prompts for setting the system up.

The system comes with easy-to-follow instructions for siting and setting up your array of Nodes and sensors. Each Node must be set up on the Gateway. You can connect up to 32 Nodes with four sensors each.

What can I use to access the data from my EnviroMonitor IP Gateway?

You can access your data on any connected computer or smartphone. Simply log into your account at WeatherLink.com or the WeatherLink and Davis Mobilize apps to view and manage your data. Both apps, as well as the EnviroMonitor app used for setup, are available for iOS in the App Store or the Google Play Store for Android users.

Where can I use my EnviroMonitor IP Gateway?

You can use your IP Gateway anywhere with AC-power and Wi-Fi or Ethernet. Normally, this would be inside, but you can install it outside where there is AC-power by using a Davis Universal Shelter. It should be within transmission range of one or more of your Nodes.

The type of environment will determine the optimal transmission range from Node to Node and Node to Gateway. For instance, if you are using the Gateway underneath the canopy of an orchard, the range is between 300-500 ft. If Nodes are installed in a field of corn above the maximum height of the crop, the range is 1,700 – 2,000 ft. The transmission distance could be reduced to below 300 feet if the Gateway or Nodes are behind an obstruction.

The system is designed to work with a Davis Instruments cabled or wireless GroWeather sensor suite.The Nodes support a long list of sensors from Davis Instruments, as well as trusted third-party sensors. You can collect data from soil moisture/temperature, leaf wetness, pressure, carbon dioxide sensors, as well as flow meters and more.

• Stream live weather data over Wi-Fi to the WeatherLink Cloud: see updates on your smartphone as they happen when the phone and WeatherLink Live are on the same local network.
• Access and securely share your current data on WeatherLink.com and the WeatherLink app; upgrade to Pro or Pro+ to archive and analyze your historic data.
• One WeatherLink Live can collect data from 80+ sensors in up to 8 transmitters in any combination.
• Collects data from Vantage Vue and Vantage Pro2 sensor suite weather stations, Sensor Transmitters, and Leaf Moisture & Soil Moisture Stations.
• Ask Alexa or Google Assistant about your weather.
• Never lose data: internal auxiliary memory and redundant battery backup.
• Industry-leading transmission range of 1,000’/300 m from transmitter to WeatherLink Live.
• Effortless setup.
• No Wi-Fi? No problem. Comes with Ethernet cable.
• Includes barometer, inside temperature/humidity sensor, AC-adapter and power cable, and optional Ethernet cable.

How do I connect to WeatherLink Live?

Connecting your Vantage Vue or Vantage Pro2 system to WeatherLink Live, and WeatherLink Live to the internet is easy. You will need a WiFi or router Ethernet connection, a smartphone, and 4 AA batteries. The first thing to do is to install the WeatherLink app on your phone, open the app, and log in by creating your free account.

Next, plug your WeatherLink Live into AC power, and install batteries for backup.The blue LED will start to flash. Follow the prompts on the WeatherLink app to connect your WeatherLink Live to the internet. The LED will go solid when the phone is connected to the internet.

Next you will set up your WeatherLink Live’s name and location by following the prompts. Then, you’ll choose your upload mode: Wi-Fi or Ethernet. For Wi-Fi, you’ll enter your network password and tap Connect. Finally, you’ll set up your transmitting station or stations — the transmitting station or stations to which the WeatherLink Live will “listen.” The app will walk you through all the steps.

You will see your station’s current condition data on the app and on WeatherLink.com within a few minutes.

How does Davis WeatherLink Live work?

The system works by collecting readings from sensors located on your Vantage Vue or Vantage Pro2 weather stations, or any other Davis transmitting station. (For example, you can set up a temperature/humidity sensor, installed in a Davis Sensor Transmitter, in your basement. It will report to the WeatherLink Live along with your station’s sensor suite data.) The WeatherLink Live can receive data from up to 8 different transmitters.

How do I install WeatherLink?

Your WeatherLink Live can be placed anywhere inside with access to AC power and within the transmission range of the transmitting station or stations (up to 1,000’/300 m). You can install the Davis WeatherLink app by searching for it in the iOS App Store or Google Play Store on your phone.

How often does WeatherLink Live update?

Data for each parameter is sent from the sensor to the WeatherLink Live at different intervals. For example, wind speed is updated every 2.5 seconds as it can change very quickly. Rainfall, which changes a little more slowly, updates every 10 seconds, and barometer, which changes more slowly than either wind or rain, every minute. When your WeatherLink Live and your phone are on the same Wi-Fi network, you will see updates of your current data on your phone as they happen. When not on the same Wi-Fi network, the app updates current conditions every minute.

The brilliant, HD touchscreen allows you to easily navigate and analyze your hyperlocal weather data or view the latest conditions from anywhere in the room. The dynamic dashboard can be customized to see at-a-glance up to 21 parameters – from temperature to wind to rain. You can set hundreds of alarms to get notified when conditions that matter to you change, such as when temperatures begin approaching a critical point for outdoor work or when wind speeds reach a certain level. With a full database of historical data stored right on the console, the console offers easy access to graphs of the last 24 hours of data, last month, or the previous year.

The WeatherLink Console is a fully functional and powerful data display, storage, and analysis tool on its own – no Wi-Fi required. Or you can connect to Wi-Fi to join the WeatherLink community and upload and share data safely and securely. Use a free WeatherLink account to log in to all WeatherLink data viewing products and access all of your data on your phone or computer. Upgrade to Pro or Pro+ for more detailed analysis, charting, and mapping of data or to share your data with family, friends, the WeatherLink community, and beyond.

• Easily navigate, view, and analyze data with the vibrant, HD color touchscreen.
• Customize the dashboard to see at-a-glance inside and outside temperature and humidity, barometric pressure, wind speed and direction, rainfall, dewpoint, moon phase, highs and lows, and more.
• Use the full database of historical records to create over 100 graphs for last 24 hours, days, months, or years.
• Set hundreds of alarms to warn of dangers such as high wind, freezing temperatures, high rain rate, heat index, and more.
• Receive and display data from your local network – no Wi-Fi required. Or use Wi-Fi to join the WeatherLink community and upload and share data.
• Track detailed hourly and daily forecasts for the next 7 days when connected to the WeatherLink Cloud.
• See data from up to 8 transmitting sensors or sensor suites in one location. Choose from 80+ sensors to customize your own personal weather network.
• Add an AirLink air quality sensor to a WeatherLink Console. See how.
• View conditions and details for stations worldwide on your screen.
• See the current conditions from your remote weather station on the console.
• Protect against data loss during power outages with integrated lithium-ion battery.
• Add a second console to your system to view data in multiple rooms.
• Compatible with multiple smart home systems including Amazon Alexa.
• Console Size: 8.75″ x 6″ x 0.75″ (210mm x 152mm x 19mm)
• Display Area: 6.75″ x 4.25″ (171mm x 107mm)

Click to learn more information about WeatherLink Console.

Learn More

Can I use my existing Vantage Vue Console or Vantage Pro2 Console with the new WeatherLink Console?

Yes. Your older console is a powerful transmitter that can retransmit to your new WeatherLink Console. Refer to the original Vantage Pro2 Console User Manual or Vantage Vue Console User Manual to learn how to set up your old console to retransmit on its own ID number. Choose any open ID.

Can I connect to Wi-Fi directly with my WeatherLink Console, or do I need a WeatherLink Live to do that?

The WeatherLink Console has built-in Wi-Fi so you do not need a separate WeatherLink Live device in order to connect to Wi-Fi.

Do I have to connect my WeatherLink Console to Wi-Fi for it to receive data from my Vantage Pro2 or Vantage Vue sensor suite?

No, the WeatherLink Console can receive data from your local sensors without a Wi-Fi connection. However, Wi-Fi is needed for keeping accurate time on the console and for firmware updates (which occur at 3:00 am local time if available). You do NOT need to be logged in to WeatherLink.com; you just need to be connected to Wi-Fi.