• Light up the reflector tabs and vane on your WindTrakâ„¢ for easy viewing at night with LED WindTrak Light. Waterproof and non-corroding silver parts give long-life at just 23 mA current draw. Fits under WindTrak 15, WindTrak10 or J-Baseâ„¢ mounting socket.

• WindTrakâ„¢ wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system.
• WindTrak AV installs onto most whip antennas, including Metz and Shakespeare brands, with a whip diameter less than 1/8″ (3 mm). Combine two installations into one to reduce masthead clutter, weight, and windage aloft. Rides on low-friction Teflon® bearings. Complete with 15″ (38 cm) vane, reflective tacking arms, hardware and instructions for easy installation. Antenna not included.

• J-Baseâ„¢ can be ordered as an option for WindTrak 15. J-Base allows for side, top, or front mounting on most masts, on big boats or dinghies alike. It’s made of glass-filled poly-carbonate, 2″ (5 cm) long. Includes stainless steel set screw and (2) #10 self-tapping screws. Reduces overall weight by 15 grams when substituted for standard mounting base on WindTrak 15.

• WindTrak wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system.
• WindTrak is the perfect choice for all cruising and racing boats 15 feet (4.6 meters) and bigger.
• Reflector tape on the vane and tacking tabs make WindTrak15 easy to see day and night. WindTrak vanes are sturdy and when installed properly, offer many years of use. They have been wind tunnel tested to wind speeds of 80 knots!
• WindTrak 15 has a 15″ (38 cm) vane. Includes through-bolt or drill and tap mounting socket; 5/16″ -18 stainless stud, washers and nut. Stands 12.75″ (32 cm) tall and weighs just 3.6 ounces (101 g).
• A bird-proof spike extends another 10 inches (24 cm) above the vane to discourage birds from landing.

• WindTrakâ„¢ wind vanes continue to offer exceptional performance at the best value of any wind indicator worldwide. The secret is in the sapphire jewel suspension bearing, large fin-low inertia vane, and easy-to-read, fully adjustable tacking tab system.
• Reflector tape on the vane and tacking tabs make WindTrak 10 easy to see day and night. WindTrak vanes are sturdy and when installed properly, offer many years of use. They have been wind tunnel tested to wind speeds of 80 knots!
• WindTrak 10 has a 10″ (25 cm) vane. Includes glass-reinforced poly-carbonate J-Base for side, top or front of mast mounting on most dinghies, smaller boats and sport boats. Stands just 9.25″ (23.5 cm) tall and weighs 1.2 ounces (31 g).

• Holds up to 2000 lbs (900 kg). Safe working load is 500 lbs (225 kg).
• Will not damage braided or twisted line.
• 1/4″ (6 mm) ultra high modulas fiber.
• Includes: One pair of LineGrabbers. Each LineGrabber measures 9″ (23 cm) long.

• Take MiniShockles boating, camping, biking, motorcycle riding—anywhere you want to be sure your load is held in place solidly, securely and safely.
• UV resistant nylon webbing is sewn over marine grade elastomer. 316 stainless steel wire gate snaps will hold up to 300 pounds (136 kg). That’s ten times the capacity of most standard bungee cords.
• Includes: Black, 24″ (61cm) MiniShockle with 316 stainless steel wire gate snaps.

• Take MiniShockles boating, camping, biking, motorcycle riding—anywhere you want to be sure your load is held in place solidly, securely and safely.
• UV resistant nylon webbing is sewn over marine grade elastomer. 316 stainless steel wire gate snaps will hold up to 300 pounds (136 kg). That’s ten times the capacity of most standard bungee cords.
• Includes: Black, 18″ (46 cm) MiniShockle with 316 stainless steel wire gate snaps.

• Take MiniShockles boating, camping, biking, motorcycle riding—anywhere you want to be sure your load is held in place solidly, securely and safely.
• UV resistant nylon webbing is sewn over marine grade elastomer. 316 stainless steel wire gate snaps will hold up to 300 pounds (136 kg). That’s ten times the capacity of most standard bungee cords.
• Includes: Black, 12″ (31 cm) MiniShockle with 316 stainless steel wire gate snaps.

• AnchorSnubber helps your boat ride comfortably at anchor, even in rough anchorages, adverse currents, or strong winds. No more chain noise keeping you awake! It attaches directly to chain, rope anchor rode, or anchor snubber line.
• Installing the Shockles AnchorSnubber is quick and easy and provides an important shock absorbing member to your anchor chain that prevents sudden shock loads to your anchor, chain, bow roller and windlass. AnchorSnubbers also keep your anchor chain from transmitting loud sounds and vibrations when anchored over rock.
• Key pin shackles made of 316 stainless. Fits most anchor chains. Webbing is 20″ (51 cm) long.
• Includes: AnchorSnubber with two 316 stainless captive key pin shackles.